Javascript has two data types.

The principal data types are

To know the data type of a variable or a value, you can use the special typeof operator. This operator returns a string that represents the data type. The return values of using

A floating-point number is compounded of an integer part that is followed by a decimal point, a decimal part and the letter

You can write an integer in decimal format*(base 10)*, in hexadecimal format *(base 16)* or in octal format *(base 8)*

In addition there are certain specific number values.

2e+3 means moving the decimal point 3 digits to the right of the number 2. There's also 2e-3 meaning you move the decimal point 3 digits to the left of the number 2.

There is a special value in JavaScript called Infinity. It represents a number too big for JavaScript to handle. Infinity is indeed a number, as typing typeof Infinity in the console will confirm. You can also quickly check that a number with 308 zeros is ok, but 309 zeros is too much. To be precise, the biggest number JavaScript can handle is 1.7976931348623157e+308 while the smallest is 5e-324.

Infinity

Infinity

typeof Infinity

"number"

1e309

Infinity

1e308

1e+308

Dividing by 0 will give you infinity.

var a = 6 / 0;

a

Infinity

Infinity is the biggest number (or rather a little bigger than the biggest), but how about the smallest? It's infinity with a minus sign in front of it, minus infinity.

var i = -Infinity;

i

-Infinity

typeof i

"number"

This doesn't mean that the value to be exactly twice as big as Infinity—from 0 up to infinity and then from 0 down to minus infinity. Because there's no practical value to it. When you sum infinity and minus infinity, you don't get 0, but something that is called NaN (Not A Number).

Infinity - Infinity

NaN

-Infinity + Infinity

NaN

Any other arithmetic operation with Infinity as one of the operands will give you Infinity:

Infinity - 20

Infinity

-Infinity * 3

-Infinity

Infinity / 2

Infinity

Infinity - 99999999999999999

Infinity

NaN

Nan - "Not A Number", It is a special value that is also a number. You get NaN when you try to perform an operation that assumes numbers but the operation fails.

typeof NaN

"number"

var a = NaN;

a

NaN

For example, if you try to multiply 10 by the character "f", the result is NaN, because "f" is obviously not a valid operand for a multiplication.

var a = 10 * "f";

a

NaN

NaN is contagious, so if you have even only one NaN in your arithmetic operation, the whole result goes down the drain.

1 + 2 + NaN

NaN

In addition you can include literal characters in your strings. These characters are also called control characters. They are not printable characters, but they allow you to represent special characters.

All values become true when converted to a*boolean*, with the exception of the six falsy values:

- Primitive
- Non-primitive (objects)

The principal data types are

`Number`

, `String`

, `Object`

and `Boolean`

. The other two data types are `null`

and `undefined`

.To know the data type of a variable or a value, you can use the special typeof operator. This operator returns a string that represents the data type. The return values of using

`typeof`

can be one of the following—"`number`

", "`string`

", "`boolean`

", "`undefined`

", "`object`

", or "`function`

".var n = 1;

typeof n;

"number"

DataType | Description |
---|---|

`Number` | This includes floating point numbers as well as integers, for example 1, 100, 3.14. [number data type can store positive and negative integers or floats, hexadecimal numbers, octal numbers, exponents, and the special numbers NaN, Infinity, and –Infinity] |

`String` | Any number of characters, for example "a", "one", "one 2 three". [The string data type contains characters in quotes] |

`Object` | javascript objects depend primarily on the Object type. This type defines a set of characteristics and common properties for all the Javascript objects. |

`Boolean` | Can be either true or false.[ Represents the two logical values true and false] |

`Null` | When you try to access a variable that doesn't exist, you get the special value undefined. The same will happen when you have declared a variable, but not given it a value yet. JavaScript will initialize it behind the scenes, with the value undefined.[The null value means "no value"] |

`Undefined` | The undefined keyword indicates that the type of a variable is undefined as long as you have not initialized it with a value. |

`Number`

, `String`

, `Object`

and `Boolean`

are also objects.Number data type

The Number data type represents positive or negative numbers and positive or negative floating point numbers with or without exponents.A floating-point number is compounded of an integer part that is followed by a decimal point, a decimal part and the letter

`e`

or `E`

followed by an exponent for scientific notation.You can write an integer in decimal format

Base Type | Description |
---|---|

Decimal | The decimal notation system corresponds to all classical numbers. In order to represent a negative number prefix with minus sign(-) |

Hexadecimal | The hexadecimal notation system is based on 16 digits that are coded from 0 to 9 and then from A to F(A equal to 10 and F equal to 15. (To represent integer in hexadecimal notation in literal format you must prefix the number by 0x or 0X. |

Octal | The octal notation systems is based on 8 figures that atre coded from 0 to 7. In the base 8 the eight digit is equal to 10. To represent an inter=ger in octal notation in literal format you must prefix the number by 0. |

In addition there are certain specific number values.

Value | Description |
---|---|

NaN | Represents Not a Number |

MAX_VALUE | Represents the largest number in Javascript |

MIN_VALUE | Represents the smallest positive number in Javascript |

NEGATIVE_INFINITY | Represents a number that is smaller than the most negative number in javascript |

POSITIVE_INFINITY | Represents a number that is larger than the largest number in javascript. |

Octal Numbers

When a number starts with a 0, it's considered an octal number. For example, the octal 0377 is the decimal 255.var n3 = 0377;

typeof n3;

"number"

n3;

255

Hexadecimal Numbers

In JavaScript, you put `0x`

before a hexadecimal value (also called hex for short).var n4 = 0x00;

typeof n4;

"number"

n4;

0

var n5 = 0xff;

typeof n5;

"number"

n5;

255

Exponent Literals

1e1 (can also be written as 1e+1 or 1E1 or 1E+1) represents the number one with one zero after it, or in other words 10. Similarly, 2e+3 means the number 2 with 3 zeros after it, or 2000.1e1

10

1e+1

10

2e+3

2000

typeof 2e+3;

"number"

2e+3 means moving the decimal point 3 digits to the right of the number 2. There's also 2e-3 meaning you move the decimal point 3 digits to the left of the number 2.

2e+3

2e32.0.0.0.0.0.0.2.20000.002123321

2e-3

0.002

123.456E-3

0.123456

typeof 2e-3

"number"

Infinity

..........There is a special value in JavaScript called Infinity. It represents a number too big for JavaScript to handle. Infinity is indeed a number, as typing typeof Infinity in the console will confirm. You can also quickly check that a number with 308 zeros is ok, but 309 zeros is too much. To be precise, the biggest number JavaScript can handle is 1.7976931348623157e+308 while the smallest is 5e-324.

Infinity

Infinity

typeof Infinity

"number"

1e309

Infinity

1e308

1e+308

Dividing by 0 will give you infinity.

var a = 6 / 0;

a

Infinity

Infinity is the biggest number (or rather a little bigger than the biggest), but how about the smallest? It's infinity with a minus sign in front of it, minus infinity.

var i = -Infinity;

i

-Infinity

typeof i

"number"

This doesn't mean that the value to be exactly twice as big as Infinity—from 0 up to infinity and then from 0 down to minus infinity. Because there's no practical value to it. When you sum infinity and minus infinity, you don't get 0, but something that is called NaN (Not A Number).

Infinity - Infinity

NaN

-Infinity + Infinity

NaN

Any other arithmetic operation with Infinity as one of the operands will give you Infinity:

Infinity - 20

Infinity

-Infinity * 3

-Infinity

Infinity / 2

Infinity

Infinity - 99999999999999999

Infinity

NaN

NaN

....Nan - "Not A Number", It is a special value that is also a number. You get NaN when you try to perform an operation that assumes numbers but the operation fails.

typeof NaN

"number"

var a = NaN;

a

NaN

For example, if you try to multiply 10 by the character "f", the result is NaN, because "f" is obviously not a valid operand for a multiplication.

var a = 10 * "f";

a

NaN

NaN is contagious, so if you have even only one NaN in your arithmetic operation, the whole result goes down the drain.

1 + 2 + NaN

NaN

String data type

With javascript, you delimit character strings with single or double quotation marks. You must use single-quotation marks for strings that contain double quotation marks and conversely you must use double quotation marks for string that contain single quotation .In addition you can include literal characters in your strings. These characters are also called control characters. They are not printable characters, but they allow you to represent special characters.

Control character | Meaning |
---|---|

\\ | backslash |

\' | single quote |

\" | double quote |

\b | back space |

\r | carriage return |

\t | tab |

\f | page break |

\n | new line |

All values become true when converted to a

""

null

undefined

0

NaN

false

Related Tutorial

1
Comments

6
Switch

7
Loops